Destination guide
Plugs and sockets in Australia
Australia uses Type I angled-flat-pin outlets, also found in New Zealand. Choose your departure country below to see whether your plug fits and what adapter, if any, you should take.
Check your journey
Will your plug work in Australia?
Choose the country you are travelling from. Find out whether you need a travel adapter.
United Kingdom → Australia
Adapter needed
Your plug won't fit the sockets in Australia, so you'll need a travel adapter.
Look for a travel adapter that accepts your three-pin rectangular plug (Type G) and fits the angled-flat-pin sockets (Type I) used in Australia.
This checks whether plugs fit, not whether an appliance is safe to use. Always check your appliance's instructions before plugging in.
The example above is for UK travellers. The plug checker could not load. Reload this page to try again.
At a glance
Plugs and electricity in Australia
Australia uses angled flat-pin sockets. See the plug illustrations and electricity details below.
What the plugs and sockets look like
- Socket types
- Type I
- Voltage
- 230V
- Frequency
- 50Hz
Related plug references: Type I plugs and sockets.
Sources for our guide to Australia: World Standards, Electrical Safety First. Information last reviewed 21 September 2026. How we use these sources.
Will my devices work in Australia?
- Check the voltage printed on each device against Australia's 230V electricity supply.
- Chargers marked 100–240V, 50/60Hz are designed for the usual electricity supplies in many countries, but you may still need a travel adapter.
- Australia uses 50Hz. Check the instructions for appliances such as some clocks and devices with motors.
Common questions
Do I need a travel adapter for Australia from the UK?
Yes. Your UK 3-pin plug will not fit Australia’s angled flat 3-pin socket. Take a UK-to-Australia travel adapter. The socket is technically called Type I.
Do I need a voltage converter in Australia?
Not normally. Australia and the UK both officially use 230V at 50Hz. Most UK appliances should work electrically, but you still need a plug adapter and should check the appliance label.
Why do I sometimes see Australia listed as 240V?
Australia’s official voltage is 230V, but you may still see the supply described or measured as 240V. For most UK appliances, the important point is that Australia is in the same usual voltage range as the UK.
Can I charge my phone or laptop in Australia?
Usually, yes. Chargers marked 100–240V, 50/60Hz should normally work in Australia. You will still need the right plug adapter.